Monday, April 14, 2014

It Works

Well I am now printing.   Did the majority of my calibration and setting of parameters for PLA with my E3D V5 hotend.   It appears the fan on the E3D is a bit small and was causing the PLA to jam after printing for 30 minutes or so.  I played with the temperature but will make a new shroud for a larger fan and try and cool the transition from the block to the fins.  I have a heated bed on its way and need to order some ABS and Laywood to try.

https://plus.google.com/u/0/photos/103448858896852231120/albums/6002189658344548753/6002189659625275858

No comments:

Post a Comment